Reference: 486936
Clamp screw Ø6mm X L.1cm ALGI to handle Peugeot gas, accelerator or others (outgoing head screws)
Reinforced Clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
Cleats, turnbuckles for accelerator, choke, brake ... for motor bike Aprilia RSV, SHIVER, TUONO, Pegaso ...
Here you will find all the cable ties, turnbuckles, adjusters to handle your accelerator, choke, brake .... Small parts necessary for the proper functioning of your cockpit on your motorcycle.
Reference: 486933
Screw clamps Ø6mm X L.10mm ALGI for PEUGEOT decompressors, brake AR, MBK ... (right outgoing head screw)
Reinforced cable clamp Ø6mm X L.10mm for cable diameter Ø2,5mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8887
Cable adjuster / tensioner barrel Ø6 X 100mm aluminum thread for motorbike and other (free brake nut)
Often of poor quality or worn by the clamps .... Lightweight and resistant aluminum model!
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 490234
Clamp screw Ø6mm CGN rear brake moped or other uses (outgoing head screws)
Cable clamp Ø6mm X strengthened L.14mm (screw tightened) to diameter cable Ø2,6mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 478564
Cable clamp Ø5,5mm X L.6mm ALGI Magura for accelerator or others (screws inbound head)
Reinforced cable clamp Ø5,5mm X L.6mm for Ø1,8mm diameter cable.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 482401
Regulator / cable tensioner barrel Ø6mm thread / end piece for Ø6mm sheath for motorbikes and others (free locking nut)
Good quality, Ø6mm thread for Ø6mm sheath end.
Price
€4.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 486932
Cable kit + cable clamps, CGN barrel for moped or others
An ultra complete kit ideal for refurbishing your accelerator, clutch.
Price
€8.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 0110.02.073
Trimmer / cable adjuster barrel thread Ø5mm / end for Ø6mm sheath for motor bike and other (free brake nut)
Piece quality machined aluminum Ø5mm thread sheath tip Ø6mm.
Price
€3.33
Home in 2 to 5 days
Home in 2 to 5 days
Reference: 0101.02.031
Clamp screw Ø5,5 X L.8mm DOMINO decompression, starter & Accelerator (incoming head screws)
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Price
€3.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 0618.02.725
Barrillet / throttle grip pin and clutch Ø9 X L.13mm (large size) for motorcycle and other
Small piece machined in the mass, essential for the good actuation of your acceleration or clutch. Large model Ø9mm per 13mm length. Ball of notch Ø4mm.
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 486422
Barrel / pinion of accelerator handle and clutch Ø8 X L.16mm (small model) for motorbike and other
Small part machined in the mass, essential for the proper actuation of your acceleration or clutch. Small model Ø8mm by length 16mm. Ø4mm notch ball.
Price
€4.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 481264
Cable adjuster / tensioner barrel Ø10 X 125mm aluminum thread for motorbike and other (free brake nut)
Often of poor quality or worn by the clamps .... Lightweight and resistant aluminum model!
Price
€4.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 3106
Trimmer / thread turnbuckle barrel M6 bike and other (free brake nut)
Quality original type, ideal for refurbishment.
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 297322
Trimmer / cable adjuster barrel thread Ø7mm / end for Ø6mm sheath for motor bike and other (free brake nut)
Standard quality original Ø7mm thread sheath tip Ø6mm.
Price
€3.33
Shipping in 1-3 days!
Shipping in 1-3 days!
Reference: 252742
Cable clamp Ø5,2mm X L.8mm ALGI for throttle grip, accelerator or others (screw outgoing head)
Reinforced cable clamp Ø5,2mm X L.8mm for cable diameter Ø2,2mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 252738
Cable clamp Ø4mm X L.8mm ALGI for throttle grip, accelerator or others (outgoing head screw)
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8805
Screw clamp Ø7mm X L.1,6cm ALGI for drum brake or other applications (screw outgoing head)
Reinforced cable clamp Ø7mm X L.1,6cm for cable diameter Ø2,2mm.
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8835
Cable clamp Ø6mm X L.1,3cm ALGI for MBK gas handle, front brake MBK or others (outgoing head screw)
Reinforced cable clamp Ø6mm X L.1,3cm for Ø2,2mm diameter cable.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8836
Screw clamp Ø6mm X L.1cm ALGI for Peugeot throttle, accelerator or others (screw outgoing head)
Reinforced cable clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8806
Screw clamp Ø5mm X L.7,8mm ALGI Magura for accelerator or others (screws inbound head)
Reinforced cable clamp Ø5mm X L.7,8mm for cable diameter Ø2mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 8833
Screw clamp Ø7mm ALGI for rear brake mopeds or other uses (screw outgoing head)
Reinforced cable clamp Ø7mm X L.1,7cm (tight screw) for Ø2,6mm diameter cable.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days