100% synthetic motor oil 10W30 MOTUL SCOOTER POWER 4T MB 4 times 1L

Power 4T Scooter
10W-30 MB
Motor Oil 4T Scooter and Maxi Scooter
100% Synthesis - JASO MB - Low Emissions

USES
Specially designed for powerful and recent scooters and maxi scooters, equipped with 4-stroke engines, all displacement, with or without catalytic converter, without oil bath clutches.

All scooters used for urban or peri-urban journeys.
Suitable for all types of gasoline, with or without lead, with or without Ethanol, biofuels.

PERFORMANCE
STANDARDS API SN / SM / SL / SJ
JASO MB SPECIFICATIONS under N ° M033MOT170

100% Synthetic engine lubricant, reduces internal engine friction and improves mechanical efficiency.
JASO MB approval guarantees optimum performance and fuel consumption for scooters. Compared to a JASO MA lubricant, a JASO MB lubricant provides real energy saving performance, up to 3% savings in consumption compared to a 20W-50 JASO MA lubricant and up to 2% of savings compared to a 10W-30 JASO MA oil in urban use, frequent starts and stops.

By reducing fuel consumption, this JASO MB lubricant contributes to the reduction of greenhouse gases in relation to CO2 emissions and allows the reduction of polluting emissions (Low Emissions).

The SAE 10W-30 viscosity grade corresponds to the most recent recommendations of manufacturers, in particular HONDA for some of its models, and facilitates cold starts while reducing wear.

Excellent resistance of the oil film for high temperature protection, particularly indicated during long periods of use at full load interspersed with stop & go and accompanied by difficult engine cooling.

Very low volatility to minimize oil consumption.
Ensures engine cleanliness, superior detergent / dispersant power and resistance to increased viscosity in the presence of unburnt deposits produced by the engine. High resistance to aging.
Anti-oxidation, Anti-corrosion, Anti-foam.

USAGE TIPS
Drainage: According to the manufacturer's recommendation and to be adapted according to use.
Can be mixed with synthetic or mineral oils.

PROPERTIES
Viscosity grade SAE J 300 10W-30
Density at 20 ° C (68 ° F) ASTM D1298 0.851
Viscosity at 40 ° C (104 ° F) ASTM D445 72.8 mm² / s
Viscosity at 100 ° C (212 ° F) ASTM D445 10.8 mm² / s
Viscosity index ASTM D2270 141
Pour Point ASTM D97 -34 ° C / -29 ° F
Flash point ASTM D92 228 ° C / 442 ° F
TBN ASTM D2896 7.1 mg KOH / g