Reference: 1263
DELLORTO universal single cable tensioner screw for accelerator / choke
The tension adjuster which is placed at the end of your tubes.
Banner
There are 52 products.
Active filters
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.