Reference: 53002_00 / 53002_78
Complete cable choke kit for DELLORTO PHBG and Racing Red, Black Edition carburettor
A pack to switch your PHBG carburettors choke lever to cable choke!
Banner
There are 52 products.
Active filters
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.