Reference: 2379.02.3356

DOMINO

Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)

Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.

Price €11.03
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 01486_72

DELLORTO

Main jet for DELLORTO small pitch carburettor, 5mm thread, 8mm length, genuine (INC certified)

Certified DELLORTO INC! Choose real DELLORTO quality!

Price €3.33
At your place in 2 to 5 days
More
At your place in 2 to 5 days

Reference: 320765

CGN

CGN self-tightening clamps (choice of diameter) for gasoline / vacuum / lung / oil hose ...

Ideal in case of breakage, loss or simply wear and tear on your necklace.

Price €0.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 06 3140

MALOSSI

Head gasket Ø45.5 to 46mm 70cc MALOSSI 0.45mm thickness for Peugeot 103 / fox & wallaroo

Perfect for settling your squish.

Price €2.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 6561

CGN

Standard sheath Ø5mm TRANSFIL (Ø2.5mm inside) for brake cable, accelerator, clutch ... Choice of color

A good quality sheath that will allow you to match it to your machine.

Price €1.66
At home in 2 to 5 days
More
At home in 2 to 5 days
All best sellers
  • Banner

Carburetor only DERBI euro 3
Carburetor only DERBI euro 3

Carburetor only DERBI euro 3

Here you can find all single carburettors for motor bike 50cc with derbi euro 3 engine! Attention carburetor must be well chosen at purchase! Prefer quality at low prices initially. Then, take the following parameters into account: 1-Do you need a HARD or SOFT carburetor (depending on your intake pipe), the flexible mounting can be with rigid pipe sleeve on the flexible mountings avoid emulsions and facilitate therefore adjustments, high performance 2 ... Do you need a depression? (Depending on your tap if there is a depression on / off, depression can also be put on the pipe) 3-Do you need the ability separate lubrication? (If you want to keep the latter, a decision can also be installed on the pipe) 4-carburetor What size do you need? -Origine: 17.5mm max -Origine with unbridled pot: 19mm max -Small kit 50cc, pot, ignition ...: 21mm max -Small 70cc with little equipment: 24mm max-Kit 50cc very thorough with large equipment: 26mm max -Grosse 80cc or more configuration: 30mm max Boisseau flat or round? Generally, flat bushel provide responsive faster engine (they are shorter), they are also much less simple to set on low speed, low rpm ... This is why we usually recommend these carburetors for competition only and they are rarely mounted on a road machine! They are generally recommended on cylinders with exhaust or exhaust valve has a bar for physical reasons. The round bushel can be also very very powerful! They are also generally more suited to low speeds, has low speed and simpler to adjust, they better without accompanying valve cylinder engine exhaust, exhaust with a booster or round / oval. So they work nicely handle the 1/4 open, making it super road carburetors that did not graze everything goes ... they are generally much less greedy than the carburettor has flat bushel (especially those of low quality) .

Sorry for the inconvenience.

Search again what you are looking for

Follow us on Facebook