Reference: 27 5618.K0
4 strips (0.30 + 0.35mm) KARBONIT MALOSSI for MBK 51 / motobecane av10
High-end slats that will allow you to properly adjust your valve box.
Banner
Set of 4 high quality carbon plates from MALOSSI, you can install them on valves MALOSSI, origin (bored / threaded), on valves DR racing, ATHENA, BIDALOT and many other models. Carbon lets you attenuate vibration (resonance wavelength / frequency) so to get more performance but also more solidity.
We advise 0.30mm slices on coupler kits and 0.35mm on els kit more based diets high, you can all the way to test both thickness available in this pack.
between axis fixing holes: 8mm
2.7mm diameter holes
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 27 3407.C0
The MALOSSI valves has special specific inclination for the G2 casings of the same brand on MBK 51! Can also be mounted on old motorcycles 80cc 2T YAMAHA and HONDA!
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 27 3021.K0
Competition valves, ideal for large or small configuration, for a gain in power and considerable recovery.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 004012
Ideal for preparing your engine! High quality, ATHENA Racing valves.