Reference: 27 5618.K0
4 strips (0.30 + 0.35mm) KARBONIT MALOSSI for MBK 51 / motobecane av10
High-end slats that will allow you to properly adjust your valve box.
Banner
Set of 4 high quality carbon plates from MALOSSI, you can install them on valves MALOSSI, origin (bored / threaded), on valves DR racing, ATHENA, BIDALOT and many other models. Carbon lets you attenuate vibration (resonance wavelength / frequency) so to get more performance but also more solidity.
We advise 0.30mm slices on coupler kits and 0.35mm on els kit more based diets high, you can all the way to test both thickness available in this pack.
between axis fixing holes: 8mm
2.7mm diameter holes
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 20 5123
Out of production.
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 27 3407.C0
The MALOSSI valves has special specific inclination for the G2 casings of the same brand on MBK 51! Can also be mounted on old motorcycles 80cc 2T YAMAHA and HONDA!
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 13700213
Competition valves for BIDALOT G1/G2 casings on MBK 51.
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 515384
G1 carbon competition valves with a thickness of 0.35mm for your MBK 51!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...