Reference: 35 7259
Set of 2 segments chrome for kit MALOSSI aluminum 70cc Ø47mm
Ideal in case of loss of compression and to put your high engine to nine.
Banner
For more performance and solidity on vertical minarelli, one of the solutions is to put a kit with piston in axis of 12mm, of course you will need the crankshaft for axis of 12mm appropriate. The piston d.47mm 12mm MHR axis for the 70cc aluminum MHR kit with bar for vertical minarelli and the MALOSSI MHR replica kit only . This piston is also the replacement model for MALOSSI MHR REPLICA phase 1 Ø47mm kits on minarelli am6. Excellent quality, treated, 2 thin hard chrome domed segments… a must have for vertical, in addition, it has side grease nipples! Supplied with 12mm axle, piston ring and clips in G.
Select your lettering A / B / C / D according to the wear of your kit, the lower the letter, the lower the piston has a rating.
Example :
A for kit which has from 0 to 5000km
B for kit which has from 5000 to 9000km
VS…
D ...
Reference: 35 7259
Ideal in case of loss of compression and to put your high engine to nine.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: P-366
Full spare piston kit 70cc cast iron on minarelli am6 BARIKIT.
Reference: 06137550
Spare piston of excellent quality for kit AIRSAL Xtrem red 88cc Ø50mm minarelli am6.
Reference: 06131448
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: PI.44.480A.I
Piston complete segment bi spare, top model home VERTEX for kit high ITALKIT 70cc Ø48mm on minarelli am6.
Reference: 06135850
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: 3413047.A0
Excellent for refurbishing your MALOSSI kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 23156.02
Piston diameter 55mm PARMAKIT by VERTEX high end for minarelli am6.
Reference: 06133348
Quality piston kit for your 70 AIRSAL.
Reference: PI.44.48A.V
Spare bi segment piston, VERTEX high end model for ITALKIT high engine kit with long stroke 44 or 42mm on minarelli am6 or HONDA NSR with 75cc long stroke 44mm.
Reference: G-211-BZ
Perfect for refurbishing your BARIKIT kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 06301050
A high quality VERTEX replacement piston to be changed every 7,000 km.
Reference: 06301150
A spare piston good to change every 7000 km.
Reference: PI.63.50A.I
VERTEX very high quality piston, specifically for TOP PERFORMANCES aluminum kits (maxikit TPR 86cc, 80cc TPR kit ...) on minarelli am6!
Reference: 992414A
Top of the range TOP PERFORMANCES RACING TPR replacement piston for minarelli am6.
Reference: G-469-BZ
Piston BARIKIT sapphire blue kit Ø50mm for minarelli am6.
Reference: 082002.A
Ideal for the maintenance of your 70cc Ø47,6mm ATHENA RACING kit!