Reference: 09506
Float shaft for DELLORTO PHBG carburettors
Bar, axle, float holding rod for DELLORTO carb.
Banner
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.