Reference: 18951-53
Screw-in valve cover for PHBG carburettor new models
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Banner
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.