Reference: 129517
air mixture screw only for carburettors DELLORTO PHBG
The only wealth screws for your PHBG!
Banner
A fuel leak is often synonymous with a dead float or a worn needle. The float when it fills with gasoline no longer closes the inlet and the carburetor starts to leak, so it is important to maintain the carburetor and change the float if necessary. This float is the standard 4 gram model.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 2707
The idle screw without its spring for your PHBG!