Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Banner
Ideal for refurbishment after pronounced wear, loss, ... Here is the accelerator / choke cable tensioner screw for DELLORTO carburettor. It is fixed on the tube and requires the locking nut. Delivered alone, unitary.
Total length: 23mm
Thread length 15mm
External diameter of the thread: around 4.90mm
Internal diameter (cable passage) 3mm
Sleeve fitting diameter: 6.90mm
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 129517
The only wealth screws for your PHBG!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.