Reference: 1298
carburetor for cable choke valve DELLORTO PHBG
The little room in which hangs the starter cable.
Banner
If you want to embellish your PHBG with a racing touch while making the jet settings more practical (you just have to remove the cap and tilt the carburetor to change the jet .. Without removing the tank). Here is the machined brass tank cap from Dellorto is reserved for Dellorto PHBG carburettors equipped with aluminum tank. The tank is also on sale here, the cap gasket not being separately, you will have to buy the complete PHBG gasket pack also on sale here.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 26 4189
Ideal for lost or modify the passage of your cable.