Reference: 324263
Reinforced DOPPLER needle cage Ø12X15X15mm minarelli am6, 103, DERBI, PIAGGIO, PUCH ...
Needle cage mounting on many models of crankshaft and engines! Diameter Ø12 X 15 X 15mm, available in 3 sets of specific adjustment.
Banner
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
The DOPPLER Sport crankshaft is a reinforced model, balanced and in full masses below the ER1 and ENDURANCE DOPPLER models, it is really intended for the reinforcement of the low engine and to accompany a slightly prepared engine. The steels used are of very good ranges, they are treated and well hardened, the balancing is dynamic and well cared for! Material that really surprised us !!!
When we talk about finishing at DOPPLER, we do not skimp and that for all vilo models! Named Sport at RRD and ORIGIN at DOPPLER, we preferred to name it as it does not look like an original model with its full masses, its reinforced connecting rod ... The finish is really at the top for such a price.
The connecting rod is placed on a reinforced crank pin and a well increased cage with copper anti-friction wedges. Aluminum plugs obviously cover the balancing holes. For more pre-compression, the masses are ultra full. The lubrication is obviously reviewed and corrected too. The connecting rod is a high quality model well designed, manufacturing method cast then polished.
In summary, this crankshaft will withstand without problem original or slightly prepared configurations of the 50cc or small 70cc kit type. For engines requiring more high speeds and more efficient, we will still prefer to use the ENDURANCE or ER1 model but all the same more expensive! The connecting rod size, the stroke, the diameter of the bristles remain as the origin.
Features :
-Reinforced model
-Full mass
-Soies of Ø20mm and one in Ø17mm origin
-Reinforced connecting rod original size 85mm
-Cage original size 12X15X15mm
-Course: origin 39.00mm
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIEJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX FR
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 324263
Needle cage mounting on many models of crankshaft and engines! Diameter Ø12 X 15 X 15mm, available in 3 sets of specific adjustment.
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: CIG-78R
A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: 9921720
A vilo of quality to guarantee a solid and powerful engine!
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: CIG-133R
A reinforced crankshaft for a low solid engine, ideal to accompany a prepared configuration! Stroke slightly increased to 40.7mm!
Reference: IM07017
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!
Reference: 090935A
A crankshaft, solid, reinforced and of very good quality for a small price.
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 80038
An excellent crankshaft, made in Italy, finishing and impeccable balancing!
Reference: 5312280
A very high quality crankshaft, dynamic balancing, cut from the best steels, all the know-how of MALOSSI MHR for your am6 engines!
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!