Reference: 1213035B
Valve diffuser (venturi) of valve MALOSSI VL6 and VL15
An obligatory product for a perfect functioning of the gas supply.
Banner
Valves that we recommend for a carburation of 17.5 to 28mm, they are excellent on small, medium and large configuration. They are delivered with 0.30mm slats in carbon or karbonit according to your choice.
You can buy separately a set of slats of all thicknesses to make better settings (namely that the motors which speak at low speeds (torque) will accept thinner slats and the motors which speak at very high speeds will require very thin slats. rigid (like 0.40mm).These valves are delivered with a diffuser (venturi), do not make the mistake of removing it!This diffuser brings you performance.The ideal is to align your pipe to this diffuser.
They are intended for minarelli am6, derbi euro 1,2 and 3, MALOSSI MG casings, vertical Minarelli with big polini valve, MBK 51 with ATHENA casings, GIRAUDO, Peugeot 103 with MALOSSI casings...
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 9931600 / 9937820
The famous V.FO RC E competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 53400.12
PARMAKIT valves for your mécaboite 50cc MINARELLI AM6 engine!
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 511244
Quality valve for your MINARELLI AM6, DERBI EURO 2, 3 and 4 engine.
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 2714152.C0
Much improved version of MALOSSI VL15!
Reference: LP.44.3
A set of 2 improved slats for motorbike with minarelli am6 engine.
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: LP.44.40
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...