Reference: 164577
P2R original type oil pump adjustable for minarelli scooter, booster, bw's, nitro, aerox, cpi, sr50...
A must have item for those who keep their lubrication separate with the engine oil tank for automatic mixing.
Banner
Malossi SpA is pleased to make available to its customers a new series of primary transmission gears for scooters 50cc.Ces new gears are the result of 20 years of experience Malossi in the design and manufacture of gear scooter racing and road. The new gears H. t. Q. have been studied and built with straight teeth to minimize losses through friction and stress on the supports. Moreover, our gears slightly lengthen the reports, allowing to use the power of your scooter and to guarantee a considerable sprint compared to your original scooter. The transmission is extremely important in a good preparation, if your drive and torque control are at their maximum, your minute level engine revolutions and also that the top speed does not sufficed you! Just change your transmission to operate your bottom to top speed obviously losing some can of acceleration, it will also enable the settings, a different couple, it will accompany the new settings Inverter / spring spurt. We recommend the racing with a housing mounted on bearings and good transmission oil. The primary drive is the one on which the clutch housing is fixed, there are also secondary transmission. The transmission MALOSSI MHR is a real competition of racing room, they have the reputation of being indestructible! Take advantage. Before purchase, we recommend you to observe your primary and secondary transmission to know its teeth and thus judge on which to take. We advocate an area of 100km and running an oil change after 1000/1300 km.
Itself on:
PGO STAR 50cc 2 stroke
Reference: 164577
A must have item for those who keep their lubrication separate with the engine oil tank for automatic mixing.
Reference: 67 7014
Elongated primary transmission, ideal to gain top speed with a good setup on scooter with short horizontal minarelli or KEEWAY!
Reference: 1693
A kick nut type origin of very good quality more resistant than the origin.
Reference: 485868
Essential piece for a refurbishment of your starting system.
Reference: 481460
Locknut M16 X 1.5mm Rear wheel model with blue nylon ring. For Chinese 50cc scooter or other applications.
Reference: 466805
Ideal for replacement cost and the rehabilitation part of your boot.
Reference: 490087
A kick nut type origin of very good quality much cheaper than the origin. For scooter Peugeot 50cc 2 stroke and KYMCO 2t and 4t with oil pump KEIHIN 13,5mm.
Reference: 482119
Ideal for a complete refurbishment of your starter system.
Reference: 509141
Original type oil pump for SYM and KYMCO 50 2T scooters.
Reference: 509142
Complete oil pump original type for CPI, KEEWAY, ... 50 2T.
Reference: 479326
A kick nut type origin of very good quality much cheaper than the origin. For Peugeot 50cc 2 stroke scooter with KEIHIN 13,5mm oil pump.
Reference: 478415
Ideal in case of starter problems, original type and not expensive!
Reference: 466800
A nut of excellent quality identical to the origin but much cheaper than in concession.
Reference: 31200-XDA-000
Complete good quality starter, original type Ideal in case of hs or burnt starter ...