Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Banner
Ideal for refurbishment after pronounced wear, loss, ... Here is the accelerator / choke cable tensioner screw for DELLORTO carburettor. It is fixed on the tube and requires the locking nut. Delivered alone, unitary.
Total length: 23mm
Thread length 15mm
External diameter of the thread: around 4.90mm
Internal diameter (cable passage) 3mm
Sleeve fitting diameter: 6.90mm
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!