Reference: 152122
kit of 4 sheets 20 X 15cm, joint board BA55 250°C multi-thickness fiber for car, mécaboite, scooter, mob, ... to be cut
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Banner
Ideal for refurbishing your seal (ignition covers, transmission housings, oil, gearbox and other applications on the engine part…). Here is the tube of LOCTITE joint compound in metal gray color with excellent properties. Whether in terms of resistance, flexibility during installation or duration over time!
This is because it can withstand various oils, lubricants and coolants. Regarding its temperature resistance, its range is - 55 ° C to 250 ° C (continuous) and 250 ° C max at peak! The paste is not recommended for the parts in permanent contact with the fuel, it can be used in addition to an existing gasket pre-cut by hand to greatly improve the seal and the traditional gasket. Clearly, a high quality product (renowned brand) in terms of resistance and various applications.
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: 492203
A professional product, high quality, designed to repair any type of plastic body such as bumper, motorcycle fairing, scooter, ....
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: 036.164
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: 3479
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.
Reference: VKM00040
Artein cutting joint sheets
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: P300000999001
Pack of ATHENA Racing cutting edges with joint pipe.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.