Reference: 075805
Pipe of admission ATHENA racing for motor bike 50cc MINARELLI AM6 Ø19 with 28mm with flexible Ø24mm adapter
An intake pipe very well designed, ideal to accompany a push engine configuration.
Banner
The flexible pipe brand ATHENA racing for all minarelli am6. It will send your carburetor slightly to the left and down, very practical on most of the am6 engines fitted. It also has an outlet for separate depression or even lung lubrication, you can also plug this socket without any problem. It is delivered with an aluminum ring which is used to place the female carburettors type phbg or other with fixing diameter 23mm (also exists in 24 mm), internal diameter of the aluminum parts 19mm. If you have a male carburetor (which fits into the pipe) do not use this ring, the pipe is intended for a male carburetor type phbl ... fixing diameter 29 / 33mm for carburetor diameter 24 to 28mm.
Assembly summary :
With aluminum ring: for female carburetor type phbg… in 19 to 21mm Ø24mm fixing
Without aluminum ring: for male carburetor type phbl, phbh, tm24… from 24 to 28mm fixing Ø29 to 33mm
It is of excellent design, holds your vibrations very well, it is very short, and the outlet is well diffused ... Being entirely made of rubber no need for seals, they are integrated into the pipe, it does not lead in any case to the heat, avoids any rebounds of gases, and it is delivered with collar and a steel support for tightening in any reinforcement.
Reference: 075805
An intake pipe very well designed, ideal to accompany a push engine configuration.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: CT00746
A good quality pipe with an almost perfect finish for a more than affordable price!
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 10870
A pipe with a correct finish which will allow you to mount your carburetors from 19 to 26mm.
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 215.0463
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 53405.05
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!