Reference: 09596_00
Clips, needle circlips for DELLORTO PHBG carburetor and others
Ideal in case of loss or breakage.
Banner
Adjusting screw and setting accelerator cable without additional trimmer, thread size 19,70mm end Ø6mm surroundings. Thread length 12mm single, true DELLORTO. Ø 6,90mm for the sheath, internal diameter 3.5mm cable crossing. For carburettors DELLORTO. Also available with additional angled adjuster.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.