Reference: 0243
SITOPLUS exhaust for PIAGGIO VESPA 125cc T5 2T
A SITOPLUS pot more efficient than the original for scooter PIAGGIO VESPA 125cc T5 2T.
Banner
Products strictly reserved for competition in places provided for and according to the provisions of the competent sporting authorities. We accept no responsibility for any improper use.
This is one of the essential components for the development of the vehicle, studied specifically to give the engine a very good increase in power in medium and high revs. Thanks to sophisticated systems available to our technicians and the experience of over 10 years in the design and production of exhaust pipes, Malossi has created this masterpiece. The new MHR exhaust for Vespa PX 125 2T euro 3, specially designed for coupling with our thermal MHR group, allows the highest power to be achieved for the same rpm by placing it in the range of exhaust pipes. the most efficient exhaust on the market.
The big advantage of this pot is found in the special route calculated and studied to allow assembly WITHOUT CUTTING THE CHASSIS and keeping the central stand. In any operating configuration and crankcase position, this exhaust fits inside the vehicle without any harmful contact points that would otherwise require modification to the Vespa's chassis.
The counter-cone has been split to further increase the field of use to gain performance also greater than 1 CV at the highest speeds when normally the engine loses performance drastically once the maximum power speed is exceeded.
Technical characteristics :
Studied for assembly without any modification to the chassis. Made of special steel sheet (thickness 0.8 mm), obtained with robotic TIG and MIG welding procedures and autogenous manual welding folded in a traditional way. Transparent paint.
Nozzle with passage section calibrated to obtain the maximum available back pressure.
Aluminum silencer , Nitro blue anodized with end pipe embedded in the bottom for a more attractive design.
Connection to the muffler made using a bent caliper and cut with a high precision laser, connected to an anchoring ring to the crankcase arm: the vibrations generated by the engine are damped by two silentblocs placed between the caliper and muffler guaranteeing a longer life.
Mounts on:
VESPA PX 125 2T euro 0-1
VESPA PX 125 2T euro 2 (VLX2M)
VESPA PX 125 2T euro 3
VESPA PX 150 2T euro 0-1
VESPA PX 150 2T euro 2 (VLX2M)
VESPA PX 150 2T euro 3
Reference: 0243
A SITOPLUS pot more efficient than the original for scooter PIAGGIO VESPA 125cc T5 2T.
Reference: 24157200
Quality exhaust from the big brand SIP for Vespa 125 VM, VN, 150 VL, VB1T, VGL1T.
Reference: 57001.08
Exhaust PARMAKIT SPECIAL 125cc for Vespa PK, ET3 ETS ...
Reference: 200.2025
A pot very discreet and powerful enough but affordable!
Reference: 0307380
Good quality and much less expensive than an original exhaust for YAMAHA AEROX, BOOSTER, SR... 100!
Reference: 0254
A SITOPLUS pot more efficient than the original for scooter PIAGGIO VESPA PX, TS, SPRINT, VELOCE, LML STAR DELUXE 125 / 150cc 2T
Reference: TK041
Exhaust for your old HONDA VISION 75 2T
Reference: 50580
Rolled sports exhaust welded in Italy for your 125 to 180cc 2T scooters with PIAGGIO engine.
Reference: 57050.08
The special pot for PARMAKIT W FORCE kits! Titanium version, super light and does not rust!
Reference: 3217791
Sporty and discreet exhaust for VESPA.
Reference: 40.301
Couelru black body chrome or aluminum or kevlar and silent for choice!
Reference: R0010-Q
Very high quality exhaust! Chrome body, carbon muffler, volumes and counter cones made for performance!
Reference: 30512 + 30506
Reference: 150128
Original type exhaust at low price but of good quality!
Reference: 53041MI
The replacement manifold for ARROW muffler on your APRILA SR 125cc Motard from 2012 to 2016.