Reference: 42105.00
Cylinder - piston without cylinder head 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5.2
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Banner
Part become very rare, here is a kit for engines of GUZZI DINGO SPORT 50 2T. This high performance kit from PARMAKIT is very robust, powerful and torquey! It consists of a nicasil treated aluminum cylinder, a single-segment vertex piston! The diagrams, the compression ratio, the ducts ... Everything is studied to obtain an excellent engine performance. It mounts in combination with the original breech! We recommend a 17.5 to 21mm carburetor and a sport exhaust! Piston pin diameter 13mm. Admission below flange 2 screws. Attention, do not mount on GUZZI DINGO standard, for the latter, another kit exists with an intake inlet at the rear of the cylinder!
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.