Reference: 317.0005
Stud POLINI M6 X 32mm for exhaust, pipe admission ...
Set of 2 M6 studs that can be used for many applications.
Banner
Here is the POLINI Evolution adjustable intake pipe for mécaboite engine DERBI euro 1, 2 & 3! This pipe is really on top, first of all you direct it as you wish to place the carburettor as you want! Its position is provided for very large carburettors and its internal diameter also (40mm, for carburettor from 30 to 34mm).
Its fixing diameter is from Ø38 to 42mm. To avoid harmful vibrations and jolts, the sleeve is made of specific viton. Stiff enough that the pipe won't crack or break when tightening. Even on the aesthetic side, we feel that POLINI has really taken care of this piece as desired. No need to put a seal, a seal is pre-integrated at the junction, moreover it is delivered with instructions, screws... Clearly, thanks to a perfect diffusion, an absorption of vibrations, a good position... The gain in performance will be present!
-For PWK 30 and 34mm carburettors.
-Carburettor fixing Ø38 to 42mm.
-Internal diameter 40mm.
-Angle of inclination 20°.
- 360° rotatable.
Have
A= Ø40mm
B= 30
C= 20°
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 215.0463
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 215.0462
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.