- -15%
Reference: 6030039
Crankshaft, connecting rod assembly TOP RACING for engine CASAL 50cc 2T 4 and 5 speeds
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Banner
Very high quality RITO crankshaft for CASAL engine with 6 speed ratios. Original 40mm stroke, made of very high-end steel. Ultra reinforced connecting rod. Made in small custom series. Dynamic balancing, specifically designed for engines prepared with large kits but also mounts very well on original engines or in 50cc kit. Solid masses for more pre-compression. Reinforced crankpin, re-studied scratching.
Also exists in long 44mm race.
Crankshaft for CASAL 6 speed 40mm original stroke :
20mm bristles (bearing surfaces)
Crank pin offset at 20mm (40mm stroke)
Connecting rod length: 85mm
Ignition arm: 60.7mm
Other arm: 59.7mm
Reference: 6030039
Crankshaft for old engines CASAL has 4 and 5 speeds 50 2T.
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: AMT 256A
Very high quality! High-end materials, an extraordinary and very rare piece.
Reference: 53480.14
A very high quality crankshaft in coruse 42mm for your MINARELLI P6.
Reference: 9.096.22.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 6030071
Here is the Crankshaft of original type Top Racing for Zundapp 3 & 4 Speed C 50 GTS CS CX ZD ZL NEU ....
Reference: 6001012
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI RV3, P4R, P4, RV4.
Reference: 9.149.15.1.012
40mm stroke crankshaft for SACHS engine.
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: BC.1522
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.
Reference: 09.117.90.1.015
A very high quality crankshaft in 44mm stroke for your MINARELLI P6R.