Reference: 201.1903
POLINI CP EVOLUTION 19 flexible carburettor, without separate greasing, lever choke
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve….
This model is the AD (also exists in BD, AS, DS, DD, black edition, or BS), it is rigidly mounted with a lever choke, you can also switch it to a cable choke without difficulty. Compared to the SHA carburetor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication.
Advice : accompany it with a 19 or 20mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of nozzles from 86 to 100 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 85
Needle W07
40 ° cutting bushel
Needle well AU 262
Idle jet 50
Choke jet 60
Float in 4 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Summary :
Phbg AD model
Size 19mm
Pipe mounting diameter: Ø24mm
Assembly: rigid
Starter: lever (can also be done with cable)
Fixing diameter for air filter: 32mm threaded (we can also put tulips of different sizes)
Reference: 201.1903
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Reference: 517454
Replacement carburettor TUN'R 'R type PHBG DS for your motorcycle, scooter ...
Reference: 201.1901
A very good high quality carburetor at a low price, with separate greasing and vacuum plugs! Choice of cable or lever choke!
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 2575
An excellent version of the real PHBG RIGIDE DELLORTO 19mm, this CS has a large intake tulip, a lever choke and a possibility of separate lubrication!
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 467791
Cheap and quality carburettor because it is located between TNT and DELLORTO.
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 02631
The DS version of the 19mm DELLORTO VERITABLE PHBG. This flexible version has a cable choke, a separate lubrication possibility, without vacuum outlet.
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!