Reference: 201.1903
POLINI CP EVOLUTION 19 flexible carburettor, without separate greasing, lever choke
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Banner
Here is an ideal carburetor! It is of very good quality, not very expensive and well suited to small or large configurations, this PHBG BS model is a DELLORTO with lever choke (which you can switch to cable.
It does not have separate lubrication so you will have to mix it yourself! It is flexible mounting. You can mount it on the 103, 51, scooter, am6 and DERBI with original pipe ...
Its air filter attachment is in Ø31mm threaded, so you can put the cones and air box sleeve in Ø 30 to 32mm. You can also put an adaptation tulip to a larger diameter.
The carburetor now has a screw-on cover
Material type :
85 dellorto primary jet in small steps
Needle: type W07
Cutting bushel: 30 degrees
Choke jet size 60
Idle jet size 50
Needle well type AU in size 262
The choke has levers and the carburetor is male. (you can mount a cable starter ..)
float 4 grams
External diameter pipe side: 25mm
External diameter filter side: 31mm threaded air (possibility of adding a larger tulip)
Reference: 201.1903
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Reference: 2577
The CS version of the DELLORTO PHBG Ø19.5mm. Excellent quality, with large diameter, rigid intake tulip, choke lever, with possibility of depression or separate lubrication!
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!
Reference: 2568
The AS version of the DELLORTO PHBG Ø19,5mm. Excellent quality, with large diameter intake tulip, rigid, choke lever, without possibility of depression or separate greasing!
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 517454
Replacement carburettor TUN'R 'R type PHBG DS for your motorcycle, scooter ...
Reference: 467791
Cheap and quality carburettor because it is located between TNT and DELLORTO.
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 466778
A carburetor that consumes little while fueling your engine well, and all at a low price!
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 02631
The DS version of the 19mm DELLORTO VERITABLE PHBG. This flexible version has a cable choke, a separate lubrication possibility, without vacuum outlet.
Reference: 2513
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Reference: 201.1901
A very good high quality carburetor at a low price, with separate greasing and vacuum plugs! Choice of cable or lever choke!
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.