Reference: 368660
DOPPLER air filter sleeve angled 45 ° fixing Ø 28mm to 35mm with collar
Spare sleeve for DOPPLER air filters, with its clamp.
Banner
Straight out of the DOPPLER catalog… Here is the karting type airbox which will be easily installed on many motorcycle / scooter / moped carburettors. With an average size of 21cm in length, 10cm in width and 11cm in height, it is classified as an average volume. Equipped with 2 suction inlets, filtered by an interior foam + protective grid and an outgoing connecting sleeve with tightening collar… This fully removable air box is top of the range!
In addition, its aesthetics are devastating! Worthy of competition gearboxes, it is available in 5 colors for an even more advanced look of your machine ... Let's talk about performance, its volume will offer you a clear improvement, especially during the recovery because it allows a better reserve of air than a simple small filter foam for example. A foam is placed vertically inside and blocked by a plastic grid thus preventing any particles, gravel, etc ... from entering the carburetor and more importantly, the engine! It will also allow you to reduce noise compared to a normal filter. Delivered complete as presented with sleeve, collar, box, maintenance instructions, ...
Technical characteristics:
Minimum fixing diameter: 28mm
Maximum fixing diameter: 35mm
Box width: 10cm
Box height: 11cm
Box length: 21cm
Available color:
Red
Blue
Grey
White
Black
Remember to select the color of your choice before ordering.
Reference: 368660
Spare sleeve for DOPPLER air filters, with its clamp.
Reference: 368674
DOPPLER spare air filter collar, sleeve DOPPLER or other applications.
Reference: 461830
Ideal in case of loss of your old room!
Reference: 197505
Ideal for deporting your air filter from your carburetor.
Reference: 0411459
A filter often used in competition for that high quality foam and are look neat / racing.
Reference: 05 0268
A filter that improved the venturi effect so the performance of your engine while creating his racing.
Reference: 376664
Ideal for refurbishment of your air filter DOPPLER TUNING.
Reference: 478327
TUN 'R Racing air filter for SHA carburettor, a larger air reserve for more performance, a protective cover for water and a real filter element!
Reference: 482667
Ideal for refurbishment, good price of your original air box.
Reference: S410000200009
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 115023D
A nice little foam filter, straight model available in red or black color.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 203.1501
Ideal to fit your Ø64mm air filter on your POLINI CP carburettor.
Reference: 466739
A design air filter worked with very good performance.
Reference: 343.0028
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 99200.32
A stylish air box that will give a look to run your machine. Moreover, it allows a much better engine breathing it out to Labris moisture.
Reference: 114005
Ideal to repair and maintain the air box on your CPI SM, SX ....
Reference: 328087
Small discreet filter of good quality with several colors available to best adapt it to your machine.
Reference: 203.0048
A filter available in 3 diameters and 2 lengths for maximum application, it reflects the quality of its design and design!