Reference: 114010V
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC from 2021
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC from 2021
Banner
Ultralight machined aluminum horn, for threaded carburetors, available in 16 sizes shown below. Without even a protective grid at the entrance, it is therefore recommended only on a clean track.
This filter increases the performance by improving the venturi effect, however the noise developed serras increased and more castling.
Available sizes (Ø = fixing Ø and L = horn length) :
Ø32X L 33mm (DELLORTO PHBG threaded)
Ø32X L 64mm (DELLORTO PHBG threaded)
Ø35X L 36mm (MIKUNI)
Ø35X L 60mm (MIKUNI)
Ø38X L 25mm
Ø38X L 70mm
Ø39X L 70mm
Ø40X L 42mm (threaded DELLORTO PHBH, non-threaded PHBL, MIKUNI ...)
Ø42X L 40mm (DELLORTO PHBH unthreaded)
Ø42 XL 58mm (without grid and without thread)
Ø42X L 65mm (DELLORTO PHBH unthreaded)
Ø43X L 33mm (MIKUNI, without grid)
Ø48X L 20mm
Ø48X L 36mm
Ø48X L 57mm
Ø48X L 61mm
Ø50X L 61mm (DELLORTO VHST, KEIHIN PWK, MIKUNI ...)
Ø59X L 37mm (DELLORTO SHA)
Ø55X L 63mm (MIKUNI)
The information next to the sizes is only indicative, you must take the Ø of your carburetor at the level of the air filter attachment !!! You should know that an unthreaded Ø 32mm horn will be mounted on a carburetor with a fixing Ø of 31.50 to 32.50mm. A Ø52mm horn will be mounted on a carburetor with a fixing Ø of 54 to 56mm without problems!
Reference: 114010V
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC from 2021
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 99200.32
A stylish air box that will give a look to run your machine. Moreover, it allows a much better engine breathing it out to Labris moisture.
Reference: 04 1418
A small filter that takes up little space but allows good filtration and a good supply of air.
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.
Reference: 475817
Air filter in nice design. with several colors to choose to best adapt to your gear.
Reference: 115050
K&N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 203.0160
For an optimal and improved filtration of your engine with several sizes of fixation to the choices!
Reference: 1413965
A foam that can adapt to all air boxes for optimal air filtering.
Reference: 480879
A good quality filter with colors to choose from to customize your engine without taking up space.
Reference: 203.0080
A straight outlet competition air filter, high-end model with several sizes of attachment to choose from.
Reference: 328087
Small discreet filter of good quality with several colors available to best adapt it to your machine.
Reference: 1413963
A foam that can adapt to all air boxes with optimal air filtering.
Reference: 928.465.001
Large volume karting type airbox, high quality for filtration and increased air volume intake! Internal filtration with double layer POLINI foam.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 0413434
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.