Reference: 368660
DOPPLER air filter sleeve angled 45 ° fixing Ø 28mm to 35mm with collar
Spare sleeve for DOPPLER air filters, with its clamp.
Banner
Straight out of the DOPPLER catalog… Here is the karting type airbox which will be easily installed on many motorcycle / scooter / moped carburettors. With an average size of 21cm in length, 10cm in width and 11cm in height, it is classified as an average volume. Equipped with 2 suction inlets, filtered by an interior foam + protective grid and an outgoing connecting sleeve with tightening collar… This fully removable air box is top of the range!
In addition, its aesthetics are devastating! Worthy of competition gearboxes, it is available in 5 colors for an even more advanced look of your machine ... Let's talk about performance, its volume will offer you a clear improvement, especially during the recovery because it allows a better reserve of air than a simple small filter foam for example. A foam is placed vertically inside and blocked by a plastic grid thus preventing any particles, gravel, etc ... from entering the carburetor and more importantly, the engine! It will also allow you to reduce noise compared to a normal filter. Delivered complete as presented with sleeve, collar, box, maintenance instructions, ...
Technical characteristics:
Minimum fixing diameter: 28mm
Maximum fixing diameter: 35mm
Box width: 10cm
Box height: 11cm
Box length: 21cm
Available color:
Red
Blue
Grey
White
Black
Remember to select the color of your choice before ordering.
Reference: 368660
Spare sleeve for DOPPLER air filters, with its clamp.
Reference: 368674
DOPPLER spare air filter collar, sleeve DOPPLER or other applications.
Reference: 461830
Ideal in case of loss of your old room!
Reference: 114010W
MARCHALD FILTERS foam air filter for motorcycle SHERCO 50
Reference: 31320
A simple filtration layer foam ideal to prepare your original air box.
Reference: 114010U
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC 1997 to 2020 / CPI 50
Reference: 126207
Small discreet filter racing look with several colors to choose the best fit your gear.
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: 0411452
Air filter MALOSSI Red Filter E14 excelent filter gives a maximum of area with quality filtration.
Reference: 203.0116
A 90 ° angled filter, high quality horn with a nice anodized blue color and several fixing sizes to choose from.
Reference: 203.0166
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
Reference: 115121
Air filter nice design black and blue color without cover, for a nice design with good performance on your 2 wheels.
Reference: 04 2418.50
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...
Reference: 31301
A simple filtration layer foam ideal to prepare your original air box.
Reference: 203.0113
A high quality air filter with a nice aesthetic, for better protection and air intake for your engine!
Reference: 203.0011
A high-end air filter specially designed for the PEUGEOT 103 mvl, mv, lm and many more! To accompany a POLINI CP carburetor.
Reference: 114010Z
MARCHALD FILTERS foam air filter for motorcycle VALENTINI RACING 50
Reference: 268619
Small discreet filter. with a grid to prevent moisture from entering.
Reference: 491435
Ideal to refurbish your original airbox your RIEJU mécaboite 50cc!