Reference: JAC-07
BARIKIT 1.5mm socket bilge MINARELLI HORIZONTAL (ovetto, nitro, aerox, jog ...)
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Banner
BARIKIT is a Spanish brand that offers a comprehensive catalog of various engine parts for scooters and motorcycles old and new!
BARIKIT is present since the late 90s in Spain, BARIKIT was originally a large piston manufacturer competition or replacing the original, little by little they have diversified into crankshafts, valves, cylinders, cylinder heads, exhaust ... These various parts are outsourced recess and not manufactured by the house BARIKIT, however they innovate in specific outgoing and friendly products with affordable prices, in addition, the material selected by BARIKIT is always good standard! They have also evolved out their range BRK composed of very exclusive piece that are not found in other brands or cylinders FACTORY prepared a hand!
For us the main strength of this Spanish brand remains the diversity of the range, certainly many of their products are found elsewhere as they are not necessarily the primary manufacturers, however there are home crankshafts long runs of all types millet even films for Derbi engines euro 2 specific with balancer, we also find like-cylinder AIRSAL but higher diagrams, with yokes a plot with specific higher-end pistons, there are even thermal group old as MINARELLI RV4, Peugeot 103 and other models!
address:
CAMI PARETS 20
Polígon
El Congost
Telephone (Spain):
938401198
Fax (Spain):
938402295
Website:
www.barikit.com
There are 443 products.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: CUL-740
The replacement head for cast kits BARIKIT Sport 39,90mm in diameter, mounted model with an entourage of O-ring.
Reference: CUL-738
The replacement head for kits cast BARIKIT Racing 39,90mm diameter model with 2 points of additional hardware.
Reference: CIL-926-S
A version almost identical to AIRSAL but with a special piston!
Reference: PG-01
A throttle grip to fast draw CROSS ... kind of good quality plastic in black color!
Reference: EQ-999-S
Very close to the 50mm Sport AIRSAL more powerful!
Reference: EQ-923-S
Very close AIRSAL SPORT slightly improved but more expensive! A very good single segment.
Reference: EQ-992-S
The racing version of the 75cc Ø48mm BARIKIT. Mono-segment with breech block.
Reference: EQ-702
Ideal for a small configue coupleuse! Size transfer origin, strength, simplicity, performance guaranteed!
Reference: CIL-710
A very torquey 70cc with a very low price for your old motorcycles 50cc HONDA!
Reference: EQ-927-S
A kit that looks a lot like the AIRSAL, comes with a yoke! A very good 70cc torquey and powerful enough for your SUZUKI RMX, SMX!
Reference: EQ-739
The version of 70cc RACING BARIKIT, with ups charts! More powerful, but does not neglect the couple, high motor guy with head Metrakit maintained by 2 screws and studs, solid cast iron cylinder, 5 transfers, oval exhaust with booster, dual piston segments ...!
Reference: EQ-741
In the type of DR RACING and black TOP PERFORMANCES, here BARIKIT Fonte for DERBI euro 2 GPR50 ... with mounted cylinder head O-ring, 5 transfers, oval exhaust boosters, solid cast iron piston ... two segments.
Reference: CIL-771.RB
Reliable 70cc kit for your 50cc 2t scooters!
Reference: EQ-950-S
A top kit complete 50cc BARIKIT for more performances!
Reference: EQ-721
A complete kit 50cc BARIKIT for maximum strength!
Reference: CIL-726
A kit cast iron 50cc better than the original for your old motorcycles HONDA 50cc liquid-cooled.
Reference: CIL-759.RB
An ideal cylinder / piston for refurbishing your original engine and driving it every day without problem. Cast iron jacket!!
Reference: KCR-36
A pack of crankshaft spy seals with high quality C4 bearings, ideal for the refurbishment and reinforcement of your low engine!
Reference: KCR-24
A pack of crankshaft spy seals with high quality C3 bearings, ideal for refurbishing and reinforcing your low engine!
Reference: CIL-1036-S
The 125cc BARIKIT kit with WOSSNER piston for ROTAX 122 engine.