Reference: 9.096.21.1.013
Crankshaft, connecting rod assembly RITO long stroke 44mm for KREIDLER FLORETT engine
Crankshaft for KREIDLER, FLORETT ...
Banner
Crankshaft of very high quality, made in the best steels in Italy, irreproachable finish and well above the MAZZUCCHELLI. Long stroke 44mm, Ø 78mm masses.
It is equipped with a super-reinforced casting rod mounted on an increased reinforced cage, an increased crankpin, reinforced cages and a revised lubrication, studied! It is obviously delivered with its strengthened / raised small-foot needle cage. Mounts on MINARELLI P6.
Reference: 9.096.21.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 6030071
Here is the Crankshaft of original type Top Racing for Zundapp 3 & 4 Speed C 50 GTS CS CX ZD ZL NEU ....
Reference: 9.149.29.1.012
Long stroke crankshaft 44mm for 3 speed SACHS engine by hand.
Reference: AMT 256A
Very high quality! High-end materials, an extraordinary and very rare piece.
Reference: 9.117.88.1.015
44mm long stroke crankshaft for MINARELLI K6 50 engine
Reference: 6030016
Crankshaft type original quality for MINARELLI P6 and P4 has 4 speeds.
Reference: 6001013
Connecting rod reinforced in 85mm, pin Ø16mm for MINARELLI P6, P6R and RV6.
Reference: 9.149.19.1.012
42mm long stroke crankshaft for 2 speed SACHS engine.
Reference: 9.149.25.1.012
44mm long stroke crankshaft for SACHS engine.
Reference: 9.096.23.1.013
Crankshaft for KREIDLER, FLORETT ...
Reference: 9.096.24.1.015
Original 39.7mm stroke crankshaft for KREIDLER, FLORETT ...
Reference: 9.033.20.1.015
Original 40mm stroke crankshaft for 6-speed CASAL engine.
Reference: 53480.14
A very high quality crankshaft in coruse 42mm for your MINARELLI P6.
Reference: 9.117.25.1.114
Rod reinforced in 85mm, crank pin Ø16mm for MINARELLI P5R.
Reference: AMT 032A
High quality crankshaft, special 42mm long stroke model with 85mm connecting rod.
Reference: 9.149.21.1.012
Long stroke crankshaft 42mm for SACHS engine with 3 speeds at feet.