Reference: 215.0439
POLINI Evolution adjustable intake pipe 23 to 24mm carburetor (Ø28,5mm fixing) mécaboite driving DERBI and AM6
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Banner
Here is the POLINI Evolution orientable intake pipe for mécaboite driving DERBI euro 1, 2 & 3 and for MINARELLI AM6 engine! This pipe is really at the top, first of all you orient it as you wish to place the carburetor as you want! Its position is designed for very large carburetors and its internal diameter too (30mm, for 28 to 30mm carburetor).
Its fixing diameter is from Ø35 to 39mm. To avoid harmful vibrations and jolts, the sleeve is made of specific Viton. Rigid enough so that the pipe does not crack or break when tightening. Even aesthetic side we feel that POLINI has really taken care of this piece. No need to put a seal, a seal is pre-integrated into the junction, moreover it is delivered with instructions, screws… Clearly, thanks to a perfect diffusion, absorption of vibrations, a good position… The performance gain will be present!
-For PHBH, VHST, DELLORTO 28 and 30mm carburetors.
-Fixing carburetor Ø35 to 39mm.
-Internal diameter 30mm.
-Angle of inclination 20 °.
-Orientable 360 °.
A = Ø35mm
B = 30
C = 20 °
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 524153
An original type BETA RR intake pipe, ideal for am6 center distance assemblies that require an angled intake pipe!
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: CT00746
A good quality pipe with an almost perfect finish for a more than affordable price!
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 10870
A pipe with a correct finish which will allow you to mount your carburetors from 19 to 26mm.
Reference: 53405.05
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 467799
The unbeatable quality / price / practicality ratio for your am6 engines!
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.