Reference: 1282
Spring idle screw on carburettor DELLORTO PHBG, PHBE, PHBH, PHBL ...
Ideal for lost or just for a refurbishment without spending too much.
Banner
In order to refurbish your PHBG DELLORTO carburettor. The complete gasket set for normal PHBG carburetor and racing black edition.
The pack contains :
X1 tank cap seal Ø1.2cm
X1 aluminum threaded cover gasket
X1 cover gasket has 2 screws
X1 tank seal
X1 O-ring for wealth screw
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!