Reference: 53036_00
40mm 90 ° angled tube kit for DELLORTO carburettor
Ideal in case of loss or change the passage of your cable.
Banner
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!