Reference: 53024
Complete air richness screw for DELLORTO PHBG carburettors
The complete richness screw for your PHBG carburettors!
Banner
Aluminum racing tank, for all DELLORTO PHBG & PHBD carburettors, intended to offer a racing and practical touch to the carburettors. This aluminum tank allows the installation of a tank cap therefore offers ease of adjustments at the level of the main nozzle.
Please note, the tank is delivered bare, without seal or cap .
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.