Reference: 1298
carburetor for cable choke valve DELLORTO PHBG
The little room in which hangs the starter cable.
Banner
Aluminum racing tank, for all DELLORTO PHBG & PHBD carburettors, intended to offer a racing and practical touch to the carburettors. This aluminum tank allows the installation of a tank cap therefore offers ease of adjustments at the level of the main nozzle.
Please note, the tank is delivered bare, without seal or cap .
Reference: 1298
The little room in which hangs the starter cable.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.