Reference: IM07017
Crankshaft, connecting rod assembly TOP PERFORMANCES Sport race 39mm (Ø17mm bristles) for mécaboite minarelli am6
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Banner
The new version further improved for our minarelli am6 crankshaft engines POLINI EVOLUTION! Resistant to all tests, super reinforced ... But especially for a very reduced price § Polini has changed lenses on its am6 crankshaft, it is no longer the ultra high quality at € 300, but rather a crankshaft well reinforced very good quality correct for a very low price.
The rod cut in the mass is well reinforced (incredible for this price) and balancing is well worked for large diameter kits. Balancing tuned to high revs (also works on the original engine).
Mounts on motorcycles 50cc has gearbox equipped with minarelli am3, am4, am5, am6 euro 1, am6 euro 2 :
APRILIA RS 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
APRILIA RX engine am6 (attention news after 2006 in derbi euro 3 engine)
APRILIA MX engine am6 (attention news after 2006 in derbi engine euro 3)
APRILIA TUONO 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi engine euro 3)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: IM07017
Original type crankshaft and superior quality. Reinforced, solid and resistant model.
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: 486138
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 367223
One of the best quality, price and performance ratios on the market.
Reference: 518745
The ultra-reinforced full-mass CHR crankshaft. Forged / ground connecting rod with heat treatment!
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: 6030003
High quality crankshaft at low price for am6 engine.
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: 090936B
An ultra reinforced and perfectly balanced crankshaft for AM6. Ideal for large setups.
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!
Reference: 31134950
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: CB.44.91
A crankshaft of high quality with a casting rod, delivered with its bearings celeron big litter !!!