Reference: LC.12.2
Valves ITALKIT competition subscribed minarelli am6
High quality competition valves, aluminum base adhered!
Banner
The famous MHR intake kit for MINARELLI am6 engines and derbi 50cc euro 1, 2, 3 engine ... This pack consists of very large parts, the pipe is certainly the best existing model for these engines! At the same time as being fully orientable, flexible, special absorption of harmful vibrations on the carburation level, the pipe is specially designed to diffuse the gas mixture without any loss !! This pipe coupled with the superb diffuser of the VL6 by MALOSSI valves will bring you a perfectly aligned intake! The vl6 valves are racing valves with a studied base, equipped with drilled slat stops, very high quality 0.30mm carbon slats! This pack is already a must and is used for the cup gp 80 (20cv and more), for the mhr team carburetion packs Ø 21, 28 and 26mm. We greatly appreciated the easily adjustable pipe (up, down, left, right ...), the high quality rubber, the cast / machined aluminum pipe flange mhr ... In addition, this pack is very complete! This model has a Viton sleeve, Viton is used for pipe racing, it is more efficient for the scrubbing of vibrations, throttle rebounds… And is much more solid than rubber.
We recommend this pack on DELLORTO or other carburettors from Ø19mm to Ø22mm. In male fixing diameter from 24 to 26mm.
(* this pack also exists in rubber version)
The mhr viton Ø 21 admission pack contains :
Super reinforced screws (4 washers + 4 screws)
21mm Viton intake tube
Valves vl6 complete with diffuser
Intake gasket
Carburetor clamp
Notice
Sticker
Spare parts :
Valve seal
21mm Viton sleeve
Carburizing flange
Diffuser for dampers
Hose clamp
Complete vl6 valves
Reference: LC.12.2
High quality competition valves, aluminum base adhered!
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 2712430.C0
A set of six high-end blades to have the most accurate setting.
Reference: 009512
High quality competition valves, bonded aluminum base!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 9933770
Replacement valve slats for V FORCE boxes on minarelli am6.
Reference: LP.44.40
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 284766
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 480755
Quality valves for guaranteed performance!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 53400.12
PARMAKIT valves for your mécaboite 50cc MINARELLI AM6 engine!