Reference: 202.1417
POLINI re-stage primary gears for VESPA 50 and 125 2T 4-speed
POLINI primary gear for VESPA 50 and 125 2T.
Banner
POLINI reinforced clutch kit complete with discs, bells, WAVE type springs!
The Wave spring is a newly designed spiral, produced with high precision construction techniques.
This spring, thanks to its beehive structure, ensures optimal flatness on the thrust faces of the clutch and tolerates high loads of up to 200kg.
As standard, the Wave Polini spring is adjusted to have a load of 80kg which can be modified thanks to the adjustment thicknesses available inside the package and which allow the load to be changed up to 200kg of thrust. The spring is perfectly housed in the clutch hub prepared with the appropriate centering seat.
The clutch hub and pressure plates are made from solid steel.
The clutch discs have been perfected with material that increases the coefficient of friction, to improve resistance under stress.
The EVOLUTION clutch is made up of 4 steel discs covered with high performance sintered friction material (thickness 1.9 mm) and three in steel (thickness 1 mm) and assembly is recommended for prepared engines that exceed 15 HP.
Mounts on:
PIAGGIO : APE 50
VESPA: 125 2T PK - 125 2T PRIMAVERA - 125 2T XL - -50 2T SPECIAL - 125 2T PRIMAVERA ET3 - 125 2T ETS - -50 2T PK - -50 2T XL
Reference: 202.1417
POLINI primary gear for VESPA 50 and 125 2T.
Reference: 57050.21
Ideal on a prepared engine or competition, the full clutch 3 discs, hard springs 8 with plateau, working, bell ...
Reference: 243.092
POLINI thrust spring with hardness as the origin, -30, 18, 8% or +8, 15, 28% ...
Reference: 230.0016
Complete clutch with springs for VESPA and PIAGGIO APE 50 or 125 2T with 6 clutch springs.
Reference: FZ00306
Game 7 discs (4 clutches and 3 spacers) reinforced with spring for Vespa scooter 50, 90 and 125cc.
Reference: FZ00329
Game 7 discs (4 clutches and 3 spacers) reinforced with spring for scooter 50cc Piaggio APE and Vespa FL, FL2 HP ... 125cc.
Reference: 24303000
Very good quality SIP engine casing for old VESPA 2Ts.
Reference: 93003000
Quality replacement clutch for your PIAGGIO, VESPA!
Reference: 228.0000
Ideal for improving your performance on a VESPA scooter.
Reference: 202.1216
High-end parts POLINI for scooter 50cc VESPA 2T.
Reference: 245.030
Very high-end clutch springs assortment for 50cc Scooter.
Reference: 230.0402
Ultra-reinforced gearbox selectrion brace for faster passages and better durability.
Reference: 4043175
Transmission brace for preparing your PIAGGIO, VESPA scooter!
Reference: 202.1219
High-end parts POLINI for scooter 75 and 100 VESPA, helical teeth.
Reference: 230.0401
A POLINI EVOLUTION clutch thrust bearing kit for VESPA 125 and 50 2T.
Reference: 24301000
Engine casing SIP , EVO specific model with rotary intake for Vespa 50-125/PV/ET3/PK50-125/S 1°.