Reference: 9919270
intake pipe Ø24mm TOP PERFORMANCES TPR for minarelli am6
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Banner
Here is the POLINI Evolution orientable intake pipe for mécaboite driving DERBI euro 1, 2 & 3 and for MINARELLI AM6 engine! This pipe is really at the top, first of all you orient it as you wish to place the carburetor as you want! Its position is designed for very large carburetors and its internal diameter too (30mm, for 28 to 30mm carburetor).
Its fixing diameter is from Ø35 to 39mm. To avoid harmful vibrations and jolts, the sleeve is made of specific Viton. Rigid enough so that the pipe does not crack or break when tightening. Even aesthetic side we feel that POLINI has really taken care of this piece. No need to put a seal, a seal is pre-integrated into the junction, moreover it is delivered with instructions, screws… Clearly, thanks to a perfect diffusion, absorption of vibrations, a good position… The performance gain will be present!
-For PHBH, VHST, DELLORTO 28 and 30mm carburetors.
-Fixing carburetor Ø35 to 39mm.
-Internal diameter 30mm.
-Angle of inclination 20 °.
-Orientable 360 °.
A = Ø35mm
B = 30
C = 20 °
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.
Reference: 075705
A very well designed intake pipe, ideal for accompanying a high engine configuration.
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 524153
An original type BETA RR intake pipe, ideal for am6 center distance assemblies that require an angled intake pipe!
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.