Banner
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
High engine not complying with the 50cc regulation, only reserved for circuit competition, run... .
The kit TOP PERFORMANCES reserved for the vilebrequin of the same brand racing normal race 39.2mm 12mm axis. So this is the replacement kit of the maxi kit TOP PERFORMANCES for minarelli liquid scooter. You will also be able to adapt it to another custom or another normal biella vilebrequin brand and race 39.2mm or more by hinginging on the pack.
It is very good quality, for more detail, you will close to the maxi kit TOP PERFORMANCES (reference 9926580) for liquid horizontal minarelli.
The pack contains:
-Cylinder racing Ø50mm
-Piston mono segment TOP PERFORMANCES
-Reinforced piston axis in Ø12mm
-Segment fin chromé hard bombé Ø50mm
-Clips of piston
-Culture Ø50mm
- engine joint pack.
Optionally we offer you an internship 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagram and improving the duct, it increases the performance of the cylinder. An improvement in the piston and skirt stock is also included in this modification. Count an additional time for this preparation!
Reference: 992414A
Top of the range TOP PERFORMANCES RACING TPR replacement piston for minarelli am6.
Reference: 9924150
Ideal for refurbishing your TPR cylinder and regaining compression. Available in two sizes, standard Ø50mm and reboring Ø50.4mm.
Reference: 9926580
Maxikit 77cc TOP PERFORMANCES TPR.
Reference: 9924250
Quality reinforced piston pin worthy of TOP PERFORMANCES .
Reference: 9929330
A complete attachment package for a refurbishment of your engine!
Reference: 9929350
Ø50mm spare plate TOP PERFORMANCES for maxi kit 77cc normal liquid race.
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.
Reference: 166.0083
Ideal to increase the performance of your scooter engine drastically!
Reference: EQ-754
High performance version from BARIKIT in 10 transfers!
Reference: P400485100044
The must of all ATHENA kits with a bolted cylinder head for better gas explosion and better engine cooling.
Reference: EQ-707
A perfect kit to ride every day and over long distances without being afraid of heating or primer.
Reference: 081100
A kit with even further diagrams for a bigger performance boost on your scooter liquid.
Reference: 010713476
The cheapest aluminum cylinders, made in spain, AIRSAL is good and offers good performance at a reduced price.
Reference: 3113036
The original must race kit market. Out of production!
Reference: 3112642
A high-performance ultra complete engine thanks to its increased displacement and 7 large intake transfers.
Reference: EQ-995-S
The famous 47mm (70cc) aluminum BARIKIT Racing! A powerful cylinder accompanied by a good engine configuration. 50cc motorcycle engine with liquid scooter minarelli (nitro, aerox ...).
Reference: 010726476
A very good price / quality, performance and torque! Luxury model.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 9931310
A kit that offers very good torque, good speed but also a lot of strength! In addition to this, you need to know more about it.
Reference: H01073947
A kit much stronger than the aluminum AIRSAL and very torquey. A perfect kit to ride every day and over long distance without fear of a heater or primer.
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
