Reference: 040726476
Ø47,6mm cylinder head for kit 70cc AIRSAL Luxury two-segment on minarelli horizontal liquid
The cylinder head replacement for kit 70cc AIRSAL Luxury two-segment liquid cooling scooter (nitro, aerox, sr ...)
Banner
Attention parts only reserved for the competition, prohibited on road!
Here is one of the best price / quality kits 70cc aluminum market. This is the AIRSAL 70cc Ø47,6mm with incoming high compression cylinder head. This cheap cylinder does not neglect quality aluminum alloy high-end treatment with nikasil. It has 5 transfers of admission and an exhaust with bar.
Charts are pretty high at admission and low enough to escape making the torquey and not difficult to follow or set. The piston is a two-segment model VERTEX with side grease! Suffice to say that it's high quality material, durable and will last over time.
The latter is accompanied by two segments chrome purposes, promoting more torque at low revs without neglecting the high speeds thanks to their finesse. The finish is really on top. We advise you to align transfers to lower casings engine. In addition, this kit comes with an assortment of accessories presented as such as a hose and hose fittings with clamps.
The cylinder head is a high-compression chamber is incoming to have good alignment chamber / cylinder is a good performance head gaskets. The room is a hemispherical model with a polished finish. It will certainly be less effective than MALOSSI MHR, BIDALOT or Polini ... But this set is really high quality, for a reduced price.
We recommend to accompany this kit with at least: carburation 19 or 21 mm for the better (carbon flaps slats 0.30mm or 0.35mm), crankshaft and reinforced bearings, exhaust racing, candle racing, motor racing oil ....
contains:
-Cylinder
-Cylinder head
-piston VERTEX two segments
X2 segments
Axis-piston clips in G
-pack Engine gasket
-Durite, Clamps and fittings
-Notice
Optionally, we offer a preparation STAGE 1, this preparation includes a selection of the best part of our stock, a marked improvement in form and exhaust timing and a special touch of the skirt and the piston according to our best essays. This preparation requires a further period of 2 to 10 days depending on our availability! It requires tooling and around 2 hours working on this cylinder. The price is accordingly.
Itself on:
Engine 2 Time minarelli horizontal liquid scooter
2 motor scooter minarelli horizontal air Time Spent liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
Aprilia SR 50 LC NETSCAPER
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GSP GARELLI 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 LC Phatom
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC
And many other models ...
Reference: 040726476
The cylinder head replacement for kit 70cc AIRSAL Luxury two-segment liquid cooling scooter (nitro, aerox, sr ...)
Reference: 060726476
Ideal to maintain your AIRSAL kit and start fresh!
Reference: 140726476
The replacement / maintenance seal pack for AIRSAL Luxury aluminum Ø47,6mm kits on your nitro, aerox ....
Reference: 110726476
Ideal for lost compression in order to present its high engine renovated.
Reference: 3113036
The original must race kit market. Out of production!
Reference: 31 8430
A very good compromise between strength and power!
Reference: 3112642.T0
Kit MALOSSI MHR TEAM 2 Factory Ø47.6mm axis Ø13mm for minarelli horizontal liquid (nitro, aerox, ...)
Reference: EQ-754
High performance version from BARIKIT in 10 transfers!
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.
Reference: 081100
A kit with even further diagrams for a bigger performance boost on your scooter liquid.
Reference: 3115901
Maximum performance, only for liquid-cooled scooters (7 transfers and exhaust bar - single segment piston - decomposable cylinder head!
Reference: 010735476
An ultra high motor racing, high performance while it has reasonable price.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 3113262
A very good compromise between strength and power!
Reference: 3112642
A high-performance ultra complete engine thanks to its increased displacement and 7 large intake transfers.
Reference: 9929340
Top upon compression, SIMONINI kit for the long stroke crankshaft 44mm on minarelli horizontal liquid (nitro scooter, aerox and many others).
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 166.0113/10
Very high-end kit! The EVOLUTION 3 is one of the best!
Reference: 3115390
Replacing the famous MALOSSI MHR TEAM!
Reference: 9921160
The famous TOP PERFORMANCES ROSE with top of the range cylinder head with stud (two parts) diameter 47mm solid and powerful.