Reference: 329.0595
Pack complete joint for kit 50cc Ø40mm FURYTECH RS10 Pro on DERBI euro 1 & 2
A pack seal of good quality. Attention has to change your joints at each refitting for safe and reliable installation.
Banner
Finally available here, here up kit RS10 engine NIKASIL Pro (aluminum) of the house FURYTECH Racing Parts for DERBI euro 1 & 2 (do not mount on euro 3). This model has a very competitive price offers a good power compared to other high engine with a displacement 50cc!
The cylinder is a very worked aluminum model, so it offers a much higher power has an origin. The diagrams have been reworked (125/185) and have an excellent ratio torque / power. The cylinder has a large exhaust and intake of 6 transfers. The base preserves original form.
With its diameter of 40mm, it offers the limited capacity of 50cc surroundings, so it is allowed on the road. The piston is a two-segment model to preserve the couple and strength, it is also equipped with side grease! The segments included with the kit are special fonts red treated with a segment L to the top of the piston. The cylinder head has a hemispherical aluminum high-compression chamber polished finish.
Clearly, with this kit FURYTECH the house continues to hit hard and this for a reduced price. This cylinder therefore offers power, reliability (with good diagrams, special steels treated segments, large exhaust, ...) and more torque than original! Moreover, FURYECH opted for a joint reinforced aluminum for the base and the cylinder head and cylinder head O-ring for the entourage. We just regret that no cylinder head bolts is delivered but this is only a small detail ...
With this kit we recommend: carburetion Ø19 / 21mm, exhaust racing, carbon valve slices 0.30 / 0.35mm, preparation of the air box, ... the cylinder core is very well worked, aluminum and nickasil are of very high quality and finish is impressive. Make no mistake, certainly cheap, certainly 50cc, but efficient anyway ...
The pack contains:
40mm aluminum cylinder 6 transfers
Cylinder head high compression
Pack complete joint
Piston
Ø12mm piston pin
X2 segments with a L
Ø12mm piston X2 clips of G
Sticker
notice
Spare parts:
complete piston
X2 segments
Pack complete joint
Reference: 329.0595
A pack seal of good quality. Attention has to change your joints at each refitting for safe and reliable installation.
Reference: 429.0595
Ideal to give your life a high compression engine in case of loss, primer or tightening.
Reference: HM02 MVT
A powerful kit with high quality materials. He will bring strength and torque!
Reference: 3112371
The best 50cc kits on the market for DERBI euro 1 and 2! It is the strongest, most powerful that I have used in competition.
Reference: CK.12.500.G
The bi-segment version with 50cc cylinder head stud for your DERBI engine, very torquey and strong, he does not neglect high revs! High quality certified!
Reference: CK.12.500.G1
A powerful, solid and torquey kit! Two-segment Sport model with single cylinder head. high compression.
Reference: 23154.00
A high-end package respecting the 50cc displacement thus approved.
Reference: H010890399
A kit a little more powerful than the original while maintaining excellent reliability for a totally ridiculous price.
Reference: CIL-740
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... Model sport accompanied by a yoke around with O-ring.
Reference: 518458
Set cast iron kit 50 + reinforced crankshaft in full masses for DERBI EURO 2 (until 2006).
Reference: 010814399
A small cheap kit that will bring light performance to your machine while keeping a very good reliability on your machine.
Reference: CIL-738
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... To accompany a bolt to fix with 2 screws.
Reference: CK.12.501.G
The most powerful kit of the house ITALKIT, mono-segment with bolt head, of very high quality!
Reference: 030311
A good price for cylinder leave on a high solid engine, original type.
Reference: KT00115
The best quality / price! A premium product which unfortunately is not quite known, but yet to surprise many.
Reference: 9917400
A famous kit for its reliability and sturdiness, ideal for riding every day while having a good top speed, acceleration and recovery.
Reference: G-993-R
39.9mm version 50cc cylinder head stud prepared by professionals BARIKIT. Even more powerful than other 50cc BARIKIT!
Reference: 504637
The latest from DOPPLER, the high cast iron engine which brings a very good performance gain on DERBI euro 1 & 2 while preserving the solidity and the legal displacement of 50cc.