Reference: 159643
Bent pipe CGN Ø14 by Ø19mm SHA, PHBG for MBK 51 / motobecane av10
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Banner
An inlet pipe MALOSSI angled as the origin for MBK 51 (engine av10), micro shot inside to avoid the rebounds of the gases it is of very good quality. Inner diameter 15mm and 19mm outside. Output size 22X22mm,
it will be accompanied by a racing carburetor and adapted racing valves. Slightly less efficient than the straight version because it is longer so the carburetor is less close to the engine.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 02 6572B
Pipe for flexible sleeve! A very good manufacturing quality.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 20 5123
Out of production.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.