Reference: 15000377
Exhaust BIDALOT Racing Factory 2015 80/85cc low passage for DERBI 50cc perimeter, SENDA, SM, X-TREM, GPR...
Version 2015 80/85cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR...!
Banner
Not homologated on the road, only reserved for competition.
Here is a very large exhaust! The new 2019 version is one of the best for very large configurations. This exhaust is created for the BIDALOT RF WR cylinder kits in 90 or 96cc, so the mounting flange delivered is for cylinders with 4 screw mounting. The focus, compared to the 2017 version exhaust that it replaces, has been to significantly improve power at high revs.
This exhaust is delivered complete, with all the necessary mounting for each machine, with a very neat mounting on silentbloc, the mounting brackets are all adjustable. Aesthetic level and noise is huge and indescribable, you have to test it to understand the BIDALOT racing magic. The pot being very thin (8/10), the resonance is at the top, the high revs too, you really have to put this exhaust on over-boosted and well-tuned engines.
Technically, this escapement is made as follows:
- AP04 steel sheet 8/10th mm thick, laser cut
- Unit rolling of each cone manually
- Unitary welding of the seam of each cone by TIG welding
- Installation of each cone and pointing by TIG welding
- Welding of the pot by oxy-acethylene
- Each solder is struck, so as not to have a bead of solder inside the pot
Finally, this exhaust has fairly substantial and unusual dimensions, which really makes it an XXL model, suitable for larger displacements. As always, BIDALOT has worked on a wide range of revs, which ensures high torque from low revs, while maintaining outstanding performance ''at the top''.
These various artifices allow this pot to have an excellent power of acceleration, without however compromising the extension and the high revs! To conclude, the perfection of the exhaust for over-boosted minarelli am6 mécaboite engine has a name: BIDALOT RACING FACTORY.
This exhaust is already raging on meetings, competitions, runs, it is at the top at all levels, it will just be necessary to install it with the appropriate configuration and the necessary knowledge in terms of mechanics, engine settings... With a very large configuration this exhaust will be able to develop an enormous torque, an inexplicable recovery and breathtaking high speeds.
The finishes are of course also at the top with a matte varnish, very clean welds, each part is treated as it should be, the silencer is in titanium gray aluminum.
This model mounts on:
-All DERBI euro 2 or 3 engine
-DERBI SM (super biker)
-DERBI enduro (cross)
-DERBI DRD
-DERBI X-TREM
-DERBI X-RACE
-DERBI GPR
-APRILIA RX, SX... DERBI engine
-APRILIA RS, RS4... DERBI engine
- GILERA SMT and others
And other models... .
Reference: 15000377
Version 2015 80/85cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR...!
Reference: ESC-06P
A very well designed pot for the most torquey high engines. In addition it has a good finish and a very high build quality.
Reference: H10034-GPC
The approved version of the TK GP! Granted are machines with small kit 50cc or 70cc!
Reference: CARR03
A homologated and efficient exhaust for the original engines, 50cc competition and entry-level 70cc.
Reference: VCR-RD25192-RE
An approved and efficient muffler for original engines, 50cc competition and 70cc entry level.
Reference: H10034-GP
The approved version of the TK GP! Granted are machines with small kit 50cc or 70cc!
Reference: 15000877
Version 2015 88 / 94cc, exhaust BIDALOT FACTORY RACING for DERBI SENDA, SM, ENDURO, X-TREM, GPR ...!
Reference: 3278
After the success of the famous LEOVINCE V6 here over with the X-FIGHT pot even more torque on the origins cylinders or other 50cc.
Reference: CARR11-GPC
The approved version of the TK GP! Granted are machines with small kit 50cc or 70cc!
Reference: 200.0405
Low passage pot POLINI EVOLUTION for 50cc motorcycle with MINARELLI AM6 or DERBI engine.
Reference: 017703
Ideal for any bike DERBI, a pot very fashionable, very short, with silecieux black and green logo!
Reference: EC02
A very good exhaust that can agree with very good kit 50cc kit same as 70cc in long run!
Reference: H10087
High performance, light and sporty exhaust for APRILIA and TUONO RS 50 2T from 2006 to 2010.
Reference: VCR-RD15192/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: TUB810TB
A clean exhaust, well finished which will adapt the kit 50cc to 70cc way. The Special R2 for supermotard bike in am6 and engine derbi!
Reference: ESC-03
A pot very well designed for the most torquey high engines. In addition it has a good finish and a very high manufacturing quality.