Reference: CIG-132R
Crankshaft, connecting rod assembly BARIKIT BRK 4 RACE stroke 40.7mm for mécaboite driving DERBI euro 3 & 4
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Banner
Here is the most upscale crankshaft from BARIKIT for DERBI euro 3 and 4 engine in 40.00mm original stroke.
This model which is part of the BRK (BARIKIT COMPETITION) range is cut in the best steels, it has a reinforced connecting rod which rests on an increased crankpin. Unlike other models, this vilo has a real job. on balancing and real full masses, blue caps, it therefore offers a performance gain.
It will go very well with your small and large power 50cc or 70cc kits. This vilo with its weight has excellent inertia. Comes with its needle cage.
Mounts on :
APRILIA
RS4 50cc (after 2011 - D50B0 Euro 3)
RS 50 Euro 4
RX 50cc (D50B1) dal '06
RX 50cc Factory Euro 4
SX 50cc Euro 4
SX 50cc Factory Euro 4
rs 50cc (d50b0) - von '06 prima del '11
rx enduro 50cc (d50b0) - dal '06
sx sm 50cc (d50b0) - dal '06
DERBI
GPR 50cc from 2012
Senda DRD Racing 50 SM dopo 2011 - (D50B0 Euro 3)
Senda DRD X-Treme 50 R '10 - '17 - (D50B0 Euro 3)
Senda DRD X-Treme SM '10 - '17 - (D50B0 Euro 3)
Senda E X-treme enduro '05 - '10 - (D50B0 Euro 3)
Senda Racing SM Euro 4
Senda SM Limited Euro 4
Senda X-Treme R Euro 4
Senda X-Treme SM '05 - '10 - (D50B0 Euro 3)
gpr 50cc nude von '05 prima del '11 (d50b0 euro3)
gpr 50cc racing von '05 prima del '11 (d50b0 euro3)
senda drd pro racing sm (dal '05) - (d50b0 euro 3)
senda drd pro sm (dal '05) - (d50b0 euro 3)
senda r drd pro enduro (dal '05) - (d50b0 euro3)
senda r drd racing enduro (dal '05) - (d50b0 euro3)
senda r x-race trail '05 - '10 - (D50B0 Euro 3)
senda x-race sm '05 - '10 - (D50B0 Euro 3)
GILERA
RCR Enduro 50 (dal 2011 D50B0)
RCR Enduro 50cc 2006 (D50B0) - (perimeter)
RCR Euro 4
SMT Euro 4
SMT SM 50 (2011-2012 D50B0 ZAPABB00)
SMT SM 50 (dal 2013 D50B0 ZAPABB01)
SMT SM 50cc 2006 (D50B0) - (perimeter)
Reference: CIG-132R
A high quality crankshaft, ideal for strengthening your low engine with a stroke very slightly increased by 40.7mm.
Reference: 150837
The most performance crankshaft from ARTEK which can go up to 18,000 revolutions!
Reference: 468210
One of the best quality / price ratios on the market for your 50 DERBI euro 3 and 4 motorcycle.
Reference: 5312990
Top of the range ideal for a pushed engine configuration!
Reference: 518746
High performance crankshaft, 18,000 rpm, forged connecting rod, ground with heat treatment.
Reference: CIG-79R
A high quality crankshaft, ideal for strengthening your low engine while preserving an original 40mm stroke!
Reference: 090949B
Ideal for a configuration even in 70cc, the vilo carenzi is well reinforced with a relatively low price!
Reference: 19883
A reinforced crankshaft at a low price but very well balanced. Ideal for small 70cc or 50cc kit.
Reference: CB.12.9R
The ULTIMATE vilo for DERBI EURO 3 and 4, large 20mm spans, forged mass machined rod, excellent balancing, .... The best of the best !!!
Reference: 31085950
An ideal quality crankshaft to strengthen its low engine at a good price!
Reference: 467918
A very good crankshaft cheap to repair or strengthen your lower motor home.
Reference: 090936C
An ultra reinforced and perfectly balanced crankshaft for DERBI Euro 3 and 4. Ideal for large configurations.
Reference: VI13
A very good quality crankshaft which will support pushing engine configurations without problems!
Reference: 468209
Ideal to accompany small 50cc & 70cc kits on your DERBI motorcycle.
Reference: CIG-60
A very good quality crankshaft that will support 50cc & 70cc kits without problems.
Reference: 080015
Ideal for repairing your low engine and supporting an original configuration or small 50 & 70cc kits.