Reference: 343.0026
Adapter, air filter tulip POLINI CP Ø46 to 60 and 62mm to the choices
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Banner
Ultralight machined aluminum horn, for threaded carburetors, available in 16 sizes shown below. Without even a protective grid at the entrance, it is therefore recommended only on a clean track.
This filter increases the performance by improving the venturi effect, however the noise developed serras increased and more castling.
Available sizes (Ø = fixing Ø and L = horn length) :
Ø32X L 33mm (DELLORTO PHBG threaded)
Ø32X L 64mm (DELLORTO PHBG threaded)
Ø35X L 36mm (MIKUNI)
Ø35X L 60mm (MIKUNI)
Ø38X L 25mm
Ø38X L 70mm
Ø39X L 70mm
Ø40X L 42mm (threaded DELLORTO PHBH, non-threaded PHBL, MIKUNI ...)
Ø42X L 40mm (DELLORTO PHBH unthreaded)
Ø42 XL 58mm (without grid and without thread)
Ø42X L 65mm (DELLORTO PHBH unthreaded)
Ø43X L 33mm (MIKUNI, without grid)
Ø48X L 20mm
Ø48X L 36mm
Ø48X L 57mm
Ø48X L 61mm
Ø50X L 61mm (DELLORTO VHST, KEIHIN PWK, MIKUNI ...)
Ø59X L 37mm (DELLORTO SHA)
Ø55X L 63mm (MIKUNI)
The information next to the sizes is only indicative, you must take the Ø of your carburetor at the level of the air filter attachment !!! You should know that an unthreaded Ø 32mm horn will be mounted on a carburetor with a fixing Ø of 31.50 to 32.50mm. A Ø52mm horn will be mounted on a carburetor with a fixing Ø of 54 to 56mm without problems!
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: 203.0048
A filter available in 3 diameters and 2 lengths for maximum application, it reflects the quality of its design and design!
Reference: S410000200011
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 473483
Ideal for optimizing your filtration while bringing a personalized touch to your engine!
Reference: 491435
Ideal to refurbish your original airbox your RIEJU mécaboite 50cc!
Reference: 203.1505
Ideal to fit your Ø70mm air filter on your PWK carburetor.
Reference: 1413963
A foam that can adapt to all air boxes with optimal air filtering.
Reference: 492196
Original type air filter for BETA 50 from 2014.
Reference: 466739
A design air filter worked with very good performance.
Reference: 485248
For original air box has improved through this foam DOPPLER double layer!
Reference: 9910300
An angled or straight carburetor of your choice to best suit your machine.
Reference: 04 6199
A very good tulip horn for better suction of your engine.
Reference: S410000200009
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 343.0028
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!