- -50%
Reference: 1411
Straight pipe CGN Ø18 by 24mm PHBG for MBK 51 / av10 motobecane
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Banner
The admission POLINI replacement pipe for the casings of the same brand for MBK 51. 2 sizes are available, 15mm and 17 to 19mm which can be easily prepared by 21mm. We will miss his polished interior finish that is harmful to an intake pipe and causes rebounds of gases.
Remember to select the desired size before adding to cart.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 20 5123
Out of production.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).