Reference: 53027_00
Complete idle screw for DELLORTO PHBG carburettor
The idle screw with its spring for your PHBG carburettors!
Banner
Complete pipe kit, length 40mm thread off, 90 ° angle. Cable accelerator or choke on carburettor DELLORTO SHA. Mountable on all models DELLORTO standard threading! Delivered as presented with 2 against stop nut, tube, 2 rubbers, 2 threaded tube length adjustment.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!