Reference: 04301150
Ø50mm cylinder head for kit 80cc AIRSAL bi-luxury segment SUPERCROSS CPI SUPERMOTO, SMX ...
A high compression entering stud bolt of excellent quality.
Banner
Here is the first 80cc kit price of Spanish house AIRSAL, the model that we call sport dual-segment, this kit is also available in luxury with VERTEX piston mono-segment at a price of 177 euros with us! This kit has certainly a cheap yet a good quality and present performance.
Its diameter of 50mm still offers 76,57 cc real combination of the normal course of CPI 50cc engine so 39mm. In relation to the mono-segment model, it will offer more torque (it feels barely) but more durability and less high speeds, the piston of the other model is a luxury AIRSAL a single segment, it is a TECH luxury but with side mounted nipples. The diagrams have a good ratio torque / high speed (around 187/131/130 °), coupled to this large diameter 50mm we recommend this cylinder with a good configuration anyway! A good racing exhaust, a 24mm minimum carburetion to operate well, a crankshaft and bearings reinforced ... The finish is really good for such a price. The plunger is chrome bi-segment model bulging hard, it has side oilers. The cylinder head is a high-compression chamber is incoming to have good alignment chamber / cylinder and a good performance head gaskets.
The room is a polished hemispheric model. This cylinder head allows you to reconnect if desired antifreeze on your carburetor. This cylinder comes with 2 joints of base plate to put the desired squish. Clearly this cylinder is really a superb quality / price / performance ratio! It will certainly be less effective than MALOSSI MHR, BIDALOT, or POLINI because its distribution, its canals, the study, the venturi exhaust ... are relatively limited, it is a al'identique nykasil scanimet, has the incomparable nykasil hard ceramic or plasma! But there will already very efficient, especially for those who do not want a kit complex and difficult to talk. A good trainer will also draw quite astounding performance. We recommend at least: 24mm carburetor with prepa boite a air + slices valves 0.30mm / 0.35mm, exhaust racing, reinforced crankshaft and bearings, cold candle racing ... Attention, this cylinder has a release date Ø28mm exhaust and is delivered without shim exhaust to 25mm, if you have a muffler in Ø25mm you need a bilge exhaust. We recommend in any case a Ø28mm output.
The pack contains:
Cylinder head screws
Pack complete joint with 2 base gaskets for the squish
Racing aluminum cylinder 5 exhaust transfers has bar
Bi-piston segment
chrome domed segment
notice
Breech incoming high compression chamber
2 clips piston crab
Ø12mm piston pin
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Mounts on single 50cc CPI (am6 ty)
CPI SM
CPI SUPERMOTO
CPI Supercross
SMX ICC
...
Specific References
Reference: 04301150
A high compression entering stud bolt of excellent quality.
Reference: 06301150
A spare piston good to change every 7000 km.
Reference: EQ-752
The famous 7 transfers cast iron Ø47mm 50cc motorcycle engine minarelli am6, comparable to FURYTECH but less torquey, powerful and stronger!
Reference: 01301050
The only big diameter kit available on the market in luxury version SUPERCROSS CPI SUPERMOTO, SM, SMX ... Ideal to speak your bike 50cc CPI! This version is in mono-segment and has a high quality piston VERTEX!
Reference: EQ-1034-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: 01131448
The cheapest aluminum cylinder made in Spain, the AIRSAL is of good quality and offers good performance for a reduced price.
Reference: 10059909
A high complete aluminum engine, efficient, solid and reliable, a real power monster little known to the general public.
Reference: 30432.M3
Although little known in FRANCE, LUXEMBOURG, SPAIN ... This kit is all the rage in Italy, the small SIMOININI for short stroke is simple, solid and gives a great couple!
Reference: 075700
The ATHENA sport is certainly the best aluminum for a small budget, of very high quality, it is solid and very efficient! A perfect torque / power ratio.
Reference: H01138248
Solid, inexpensive, excellent torque-to-power ratio ...
Reference: 3112228
A ratio power / torque / unbeatable strength !!!
Reference: 133.1008
One of the rare competitors at the height of the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to accompany a good configuration!
Reference: 01134950
A large diameter 50mm aluminum at a low price! This AIRSAL luxury version 80cc offers a lot of torque to the engine minarelli am6, compared to the original version, it has a piston high-end segment!
Reference: EQ-1033-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: 133.1009
The famous 80 large cast iron POLINI kit for the am6 engine.
Reference: EQ-781
A large diameter 50mm in cast iron 7 transfers and exhaust has boosters! For 50cc motorcycle equipped with the minarelli am6 engine. Identical to the 80cc FURYTECH kit which is no longer available on the market!
Reference: EQ-921-S
Top BARIKIT aluminum engine with 5 transfers, piston mono segment, exhaust with bar and incoming high compression cylinder head. Guaranteed performance!
Reference: 01135850
A large 50mm diameter aluminum at low prices! This AIRSAL 80cc offers a lot of torque to the minarelli am6 engine!